Low Profile, High Efficiency Wraparound – CAW

The CAW Wraparound is available in 2’ and 4’ lengths in T8 and T5. The unique body design produces a slender and low profile appearance.

Suitable for most standard and low density ceiling applications. 100% clear acrylic prismatic diffuser hinges from either side. Flat bottom and linear ribbed sides provide excellent light control. Integral embossed white end plates with flush knockouts make fixtures for individual or continuous row mounting. For pendant or surface mounting.

HOUSING

Die-formed, heavy gauge steel housing and ends unitized into one piece.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

FINISH

All parts are finished with high gloss baked white enamel with minimum 89% reflectance, applied over iron phosphate pretreatment, for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Suitable For damp location
  • Made in U.S.A.
  • ARRA and BAA compliant

 

D-CAW

 

RLE-CAW-Spec-Sheet

 

 

Cut Sheet

Soft Surface Designer Series – CPX

Available in 1×2, 1×4, 2×2, 2×4 sizes, in 2, 4, and 6 lamp configurations, T5, T8 and BIAX.

One piece seamless cast acrylic diffuser provides uniform light diffusion with minimal brightness and contrast. Diffuser hinges from either side with no visible hardware. Matte black finish of the housing further disguises the shallow depth of the fixture. Also available in all white housing as an option. Designed for individual, surface, or pendant mount.

HOUSING

Die-formed heavy gauge steel housing welded into one piece for maximum strength.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

Premium coated baked white enamel paint used on all reflecting interior surfaces. Matte black baked enamel on all exterior surfaces.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-CPX

Cut Sheet

Soft Surface Designer Series – CPXN

The CPXN is available in 1×4, and 1.5 x 4 sizes, in 2 and 4 lamp configurations, T8 and T5.

The one-piece, seamless cast acrylic diffuser provides uniform light diffusion with minimal brightness and contrast. Diffuser snaps in and out for easy maintenance. Unique floating diffuser design hinges from either side with no visible hardware. Designed for surface or pendant mount.

HOUSING

Die-formed heavy gauge steel housing welded into one piece for maximum strength.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

FINISH

Premium powder coated, baked white enamel paint used on all reflecting interior surfaces.

CERTIFICATION

  • All units bear UL label
  • Suitable for damp location
  • Made in U.S.A.
  • ARRA and BAA compliant

 

D-CPXN

Cut Sheet

Enclosed Drum Luminaire – JO

The JO Drum Luminaire is a contemporary-styled fixture for energy efficient PL lamps, circlines and 2D lamps.

An opal diffuser envelops the housing in a smooth architectural line with accent on simplicity of design.
Three different sizes (11”, 14”, 19”) accommodate a large variety of lamp combinations.
Deep housing supplied for all emergency pack or higher wattage (18W or 26W) PL lamps.
Designed for ceiling or wall surface mounting. Optional tamperproof hardware.

HOUSING 

Die-formed heavy gauge steel housing.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards.
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty.
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDINGS

Soft white acrylic diffuser is standard. Optional white polycarbonate, fluted acrylic, and mushroom acrylic.

FINISH

Housing is finished inside and out with premium grade, baked white enamel with a minimum reflectance of 89%.
Optional black paint available for housing exterior.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-JO

Cut Sheet

Contemporary Surface Square – S24H

The S24H Contemporary Square Surface Mount is available in Mogul Base Lamping, Pulse Start Metal Halide and High Pressure Sodium up to 400W. Full compliment of lens and louver shielding media to suit almost any lighting need. Completely prewired and assembled with removable ballast assembly.

Designed for surface mount applications. Call us for other ceiling installations custom mounting brackets available, if required.

Automatic resetting heat sensitive thermal protection device will protect fixture from overheating if insulation covers fixture. Cold-rolled steel doorframe with captive countersunk ¼ turn spring loaded fasteners and concealed stainless steel hinging. Stainless steel doorframes are also available.

HOUSING

20 Gauge CRS welded construction.
Aluminum or stainless steel housing available.

ELECTRICAL

  • Metal Halide 100W and High Pressure Sodium 100W-150W.
  • High Reactance Autotransformer, High Power Factor, encased and potted, auto-resetting type.
  • Metal Halide 175W-400W and High Pressure Sodium 250W and 400 CWA High Power Factor, encased, potted and auto-resetting type.

REFLECTOR

Aluminum painted white, one piece, .030” thick.

FINISH

Detergent-cleaned with iron phosphate and chromic acid rush inhibitor, chip resistant, powder urethane polyester coating, electrostatically applied and baked.

CERTIFICATION

  • All units bear UL label
  • All units bear Made in U.S.A. label
  • UL Listed for damp location

 

D-S24H

Cut Sheet

Extruded Aluminum Cylinder S60/S80

Available in Metal Halide and High Pressure Sodium. Available in 6” and 8” diameters 6” units accommodate lamping up to 70W and 8″ up to 100W.

Surface mounting is standard. Optional stem and canopy mounting hardware include 3/8” I.P.S. 12” stem with 0-45 degree swivel canopy. Optional wall mounts come as a one-piece cast aluminum arm with access plate.

 

HOUSING

Heavy gauge, extruded aluminum, rolled and seam welded.

 

ELECTRICAL

For metal halide lamping ballast is high power factor, constant wattage auto transformer. For high-pressure sodium, ballast is normal power factor reactor type for 120V. High power factor, multi-tap, and most fixed voltages available.

REFLECTOR

Spun aluminum .040” thick, polished specular alzak.

FINISH

Standard in urethane polyester powder coated bronze. Optional black or white finish is also available.

CERTIFICATION

  • All units bear UL and Made in U.S.A. label
  • Suitable for damp locations
  • Optional wet location

D-S60-S80

Cut Sheet

S66 Modular Luminaire S66

 

Available in 2’, 3’, 4’, 6’ and 8’ lengths, in 1 and 2 lamp configurations, T8 and T5.

6”x6” narrow design is architecturally-preferred for installation in corridors, lobbies, and office areas. Direct downlight is standard. Indirect and direct/indirect applications are available as options. Individual and continuous row for both surface and pendant mounting. Alignment brackets are available for continuous row installation. Ends seams are fitted to provide the appearance of continuous smooth channel. Knockouts on channel ends allow for through wiring or end feed.

HOUSING

Die-formed, welded heavy gauge cold-rolled steel. Uplight fixtures are provided with (2) rows of 1/2” apertures along top of the housing which provide approximately 12% uplight.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

Acrylic prismatic is standard. Optional white cross baffle, paracube, and parabolic semispecular cross baffle.

FINISH

All metal parts post painted with premium grade white enamel with a minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

D-S66

Cut Sheet

13” Wide Wraparound – S12

This specification-grade wraparound is available in 4’ and 8’ lengths, 1 and 2 lamp configurations for T8 and T5.

The 13” wide housing permits replacement of old 12” wide surface fixtures without costly ceiling repairs.

Ideal for schools, hospitals, institutions, and any application where high efficiency and task appropriate illumination is essential. \

For individual or continuous row mounting. Sufficient knockouts for surface or pendant mounting.

Available with energy efficient reflectors in High Efficiency Aluminum (95% reflectance), Specular Aluminum (87% reflective), and High Efficiency White (92% reflectance).

HOUSING

Die-formed 20 gauge steel ribbed for uniformity and rigidity.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards.
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty.
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

100% clear acrylic prismatic bottom with linear side prisms.

FINISH

All parts are finished with high gloss, baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment, for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Suitable for damp location
  • Made in U.S.A.
  • ARRA and BAA compliant

 

D-S12

Cut Sheet

Recessed Grid Indirect Side Basket – D/I

The D/I Recessed Grid Side Basket provides indirect, soft, uniform illumination. Curved perforated details combine recessed fixture advantages with efficient indirect shielding.

Perforated side baskets, backed with reflective white acrylic, control glare and veiling reflections, Shielding is easily removed for re-lamping. A flanged fixture is available for plaster ceilings.

HOUSING

Die-formed, 20 gauge steel housing unitized into one piece.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

Perforated diffuser elements with matte white acrylic overlays.

FINISH

All metal parts are pretreated with a phosphate bonding process and post-painted with an electrostatically-applied, high temperature, baked, matte white enamel for superior quality and durability.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-D-I

Cut Sheet

1×4 Recessed Center Basket – D/I-14C

The D/I-14C provides direct-indirect, soft, uniform illumination. Curved, perforated details combine recessed fixture advantages with efficient indirect shielding.

Perforated center basket, backed with reflective, white acrylic controls glare and veiling reflections. Optional high efficiency, frosted, acrylic diffuser available. Shielding is easily removed for relamping. Surface mount and flanged fixture available for drywall ceilings.

HOUSING

Die-formed, heavy gauge steel housing unitized into one piece.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

Perforated diffuser element with matte white acrylic overlay.

FINISH

All metal parts are pretreated with a phosphate bonding process. All visible parts are postpainted with an electrostatically-applied, high temperature, high reflectance, baked matte white enamel for superior quality and durability.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • ARRA and BAA compliant
  • Suitable for damp locations

 

D-D-I-14C

Cut Sheet