Linear Architectual Wraparound – LAWLED

The LAWLED Linear Architectual Wraparound is available in 4’ LED Flat Board Array. The versatility of this high efficiency linear, contemporary-styled unit makes it ideal for classrooms, offices, corridors, laboratories, and any application where high efficiency, task appropriate illumination is essential.

For individual or continuous row mounting. Sufficient knockouts for surface or pendant mounting.

HOUSING

Die formed heavy gauge steel unitized into one piece.

SHIELDING

Acrylic frosted.

FINISH

Post painted in powder coated flat white polyester.

CERTIFICATION

  • All units bear UL label
  • Suitable for damp locations
  • Made in U.S.A.
  • ARRA and BAA compliant
  • 5 Year LED Warranty

8.57 LAWLED sepc

 

Cut Sheet

Vapor Tight LED Low Bay – VLEDLB2-N

This Vapor Tight LED Low Bay comes standard with stainless steel latches. For pendant mounting. Stainless steel mounting brackets reduce installation time and eliminate the need for mounting holes in fixture body. Stainless steel V hooks simplify pendant mounting with chain or cable. For individual or continuous row with flexible conduit.

HOUSING

Heavy-duty unsaturated fiberglass reinforced polyester housing with poured in place gasketing. Flame class 5VA.

ELECTRICAL

  • <10% THD and include 5 year manufacturer’s warranty
  • Operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

Glass clear diffuser is molded of UV stabilized impact resistant acrylic.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA Compliant
  • IP67 Certified
  • National Sanitation Foundation (NSF) approved components
  • NEMA 4X rated
  • Factory hose-down tested at 1500 PSI, 1.4 gallons/minute @ 12 -24”.
  • 5 Year LED Warranty

 

VLEDLB2-N Vapor TIght Low Bay-d2

Cut Sheet

LED Recessed Troffer – D85PLED

The D85PLED offers the look and feel of a fluorescent luminaire – subtle, soft direct elements provide interest and depth accross the ceiling plane, with a contemporary look that blends with today’s commercial spaces.

For recessed commerical applications such as offices, hospitals, schools etc.
Suitable for use in standard 15/16” inverted T-Bar grid ceilings.

HOUSING

Low Profile troffer body with white enamel finish.

LED COLOR

3500K or 4000K.

ELECTRICAL

  • Driver suitable for 120v-277v operation
  • Available in 2 wattages to equal or exceed the output of conventional fluorescent lamps

SHIELDING

Unique composition provides prismatic look.
Specifically formulated, frosted, prismatic acrylic lens provides a diffused luminance.
Provides an effective combination of excellent light transmission and haze.

FINISH

Matte white, high reflectivity powder coat finish.

CERTIFICATION

  • All units bear UL label
  • ARRA and BAA Compliant
  • 5 Year Warranty
  • DLC Approved

 

D85PLED Recessed LED Troffer-d3

Cut Sheet

Energy Services

There are important advantages available to project managers when working with us in any size lighting retrofit project. Our energy services division works with its clients to design, manufacture and install more efficient lighting fixtures and lighting control systems.

 

From a big factory or shopping mall to smaller offices and retail stores the benefits to our customers include reduced electric bills, modernized interior/exterior lighting and enhanced illumination.

 

But that’s true with most energy service companies. What most others don’t have is a lighting fixture factory under the same roof. With the capabilities to run our plant to meet the current high demand for energy saving lighting products, we can save time and eliminate excessive producer markups to pass that savings on to you. And, our flexibility to quickly modify our broad range of fixtures assures compliance and consistency with your expectations.

 

RLE’s energy services group has successfully completed energy-efficient lighting systems for over 400 million square feet in retail, commercial, industrial and institutional facilities. And, we guarantee light level recovery, kilowatt reduction and system performance.

RLE

Our manufacturing division of RLE manufactures a complete line of energy efficient fluorescent, HID, and LED fixtures including recessed, surface, steel and aluminum linear; direct/indirect, vandal resistant, task, and vapor tight lighting. Robert Lighting fixtures and the product support that lighting specifiers depend upon, is available through our headquarters staff and a highly responsive national sales agent group located throughout the US.

 

Saying you offer a short run capability to make product modifications to seal a deal is one step. Actually doing it for thousands of satisfied customers is the primary reason we not only “still exist” but continue to prosper. Since 1944, Robert Lighting has been known to architects, specifiers, facility managers and others for being there when others just can’t keep their commitments.

 

Our customers have direct involvement in many aspects of the specification, project design and installation of lighting products. As a vertically integrated lighting provider we see your projects the same way you see them – from having to make it all fit together and perform as anticipated. Not only do we make and modify fixtures, but our engineers work directly with our customers to create the project plan, and are even happy to “get our hands dirty” during installation.

 

The expertise you need on your projects will not come from a monolithic, multi-national fixture supplier that is levels removed from the field. RLE is you!

Linear Parabolic Direct/Indirect – YYB

The YYB Linear Parabolic Direct/Indirect is available in 48″ and 96″ lengths.
Ideal for classrooms, offices, conference rooms and reception areas.
Available as direct/indirect pendant or direct surface mount. Individual or continous row mounting with cables or stems. Continuous rows achieved with contoured joiners. Available in one or two lamp T5 or T8 configurations. Parabolic baffle assembly constructed from matte anodized aluminum is standard. Louver features snap-in installation for easy lamp replacement.

HOUSING

The housing is constructed of heavy gauge steel treated with anti-rust protection.

ELECTRICAL

Instant start electronic ballast comply with Federal energy efficiency standards.
Optional electronic dimming is available.

FINISH

Fixture body post painted with white gloss enamel. Custom colors available.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • ARRA and BAA compliant

 

628YBB-diag

Cut Sheet

Shallow Surface Module – 7200LED

The 7200LED Shallow Surface Module is available in 1×2, 1×4, 2×2, and 2×4 configurations.
End and side seams are welded and filled to provide the appearance of a smooth continuous channel.
Flush steel doorframe is standard.
Optional glare dampening ribbed aluminum regressed frame.
Door frame is secured by rotary cam latches.
For surface and pendant mounting individually or in continuous rows.

HOUSING

Die formed, heavy gauge steel housing welded for rigidity and structural stability.

LED

  • CRI>80
  • PF>90
  • Up to 50% Energy Savings
  • Solid state driver
  • 5 year warranty

SHIELDING

100% virgin acrylic prismatic is standard. Consult option sheet for other shieldings.

FINISH

All metal parts are phosphate coated and painted after fabrication with baked white enamel electrostatically applied providing a durable finish with a minimum 89% reflectance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • ARRA and BAA compliant

 

 

837SA-diag

Cut Sheet

LED Recessed Module – K85LED

This Recessed LED module is available in 1×4, 2×2, and 2×4. Flush steel hinged and latched doorframe, screw assembled for simple diffuser replacement.
Integral metal-to-metal light seal channels eliminate light leakage on all four sides. Fixture housing flanges rolled to eliminate sharp edges.

HOUSING

Die-formed heavy gauge steel housing welded for rigidity and structural stability.

LED

  • CRI>83
  • PF>90
  • Up to 50% Energy Savings
  • Solid State Driver
  • 5 Year Warranty

SHIELDING

100% virgin acrylic prismatic is standard. Consult option sheet for other shieldings.

FINISH

All metal parts are phosphate coated and painted after fabrication with baked white enamel electrostatically applied providing a durable finish with a minimum 89% reflectance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • ARRA and BAA compliant
  • 5 Year Warranty

 

K85LED--daig

Cut Sheet

Modular LED High Bay Series – MLEDHB-3

Ideal for factories, warehouses and gymnasiums where safety is a concern.

Sensor is flush-mounted to avoid breakage. Available with frame for areas that require lamp protection. Pendant mounting (for chain or cable) standard. Optional mono-point hub/splice box for simplified HID replacements. Optional provisions for dimming/HI-LO controllable systems for additional energy savings.

HOUSING

Die-formed, 20 gauge steel with knockouts for stem, cable or chain hangers.

LED EMISSION

Candela Plots

HARMONICS

<20%

CRI

>80%

DIMMING

10-100%

LED DESIGN LUMENS

21,000 based on 4000K

COLOR TEMP

4000K

FINISH

All metal parts post-painted with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pre-treatment for maximum adhesion and rust resistance. Post painted door frame and ends standard. Post painted units finished in gloss white powder coat.

CERTIFICATION

  • ARRA and BAA compliant

 

MLEDHB-3-SPEC

 

Cut Sheet

Flat Board, Single or Dual LED Channel – SLED

The SLED Flat Board is available in 24″, 36″, 48″, 72″ and 96″ lengths in Flat Board, 1 or 2 LED tubes lamp configurations.

Combination snap-in end plates double as couplers, eliminating the need for extra hardware in continuous row applications. Snap-on cover makes installation quick and easy. Suitable for low density ceiling applications.

Symmetric, asymmetric, and light shield reflectors available. For surface or pendant mounting, individual or continuous row mounting.

Available with specular aluminum reflector (87% reflectance), high efficiency white reflector (92% reflectance), or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die-formed heavy gauge steel housing with ample knockouts for east of installation.

ELECTRICAL

LED: Highest quality driver, emmitters and power supply for long life.

FINISH

All parts finished with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

sled-pic

Cut Sheet