Linear & Architectural

The RLE Linear Architectural Series complements the expressive line is designed utilizing both colors and mounting arrangements for a similar appearance.

RLE provides a choice of fixture types for the best lighting solution. It is ideal for sign lighting, exterior building illumination, accenting, indoor commercial illumination, retail, restaurant/food, entertainment industry and any location requiring architectural luminaires. It is available in 2′, 4′ and tandem configurations using T5HO, T8 and T12HO light sources.

See The Product Line

Energy Audit

RLE Industries can provide you with a full energy audit to help you decide where to best spend your project dollars.

Our audit includes the following:

Energy Efficient Lighting Fixtures

  • No charge consultation audits
    • new construction
    • retrofits tenant
    • buildout
  • Turnkey installations: energy efficient lighting fixtures provide a positive impact on your bottom line.
  • Demand response management – peak load reduction.
  • Assistance in design layout, sustainability and LEED points.

 Process all rebates and utility incentives

  • NJ Smart Start buildings and Custom Measure Program
  • NYSDEA/CON EDISON
  • LIPA

Monitoring Systems

  • Data loggers provide detailed information on buildings lighting and occupancy patterns NJ SmartStart custom measure program
  • Achieve maximum efficiency by combining our RLE industries efficient lighting and lighting energy control system

 

Energy Tax Incentive Act EPACT 2005

  • We process and obtain for you all EEP a CT 2005 tax incentives and deductions for both public and private projects
  • Commercial building immediate tax reduction incentive for lighting

 

Building envelope

  • Include retrofit and new construction

Single Lamp Low Profile Strip – ST

The ST Single Lamp Low Profile Strip is available in nominal 2’ 3’, 4’ lengths in 1-lamp configurations, T5, 13W, 14W, 21W, 28W or T5-HO 24W, 39W and 54W.

Fully assembled housing for individual or continuous row mounting. Predrilled mounting holes for easy installation. Can be fed through end or back of unit. Suitable for low density ceiling applications. Symmetric, asymmetric, and light shield and swivel adjustable reflectors available. Snap-on diffusers in clear or opal available.

Available with energy efficient reflectors in specular silver (95% reflectance) or specular aluminum (85% reflectance).

HOUSING

Die-formed heavy gauge steel housing with ample knockouts for ease of installation.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

FINISH

All parts pre-painted with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-ST

Cut Sheet

2×2 Modular Design Square – R24V

The R24V 2×2 Modular Design Square is available in Pulse-Start Metal Halide up to 450W and High Pressure Sodium up to 400W.
All lamps are medium base and are vertically-mounted for maximum lamp efficiency.
A full compliment of shielding media for all environments.
Completely prewired and assembled with removable ballast assembly.
Designed for mounting in 2×2 grid (T-Bar) ceilings.
Flange for gypsum board ceilings is optional. Call for other ceiling applications.
Automatic resetting, heat-sensitive thermal protection device for non-IC installations.
Cold-rolled steel doorframe with captive countersunk ¼ turn spring-loaded fastener and concealed stainless steel hinging.
Stainless steel doorframes are also available as an option.

HOUSING

20-Gauge CRS welded construction. Please call for stainless steel housing.

ELECTRICAL

  • High-reactance auto-transformer, high-power factor, encased and potted, autoresetting type
  • All wattages up to 400W contain pulse start ballasts
  • “V” denotes a vertically-mounted lamp, mogul base

FINISH

Detergent-cleaned with iron phosphate and chromic acid rust inhibitor, chip-resistant, powder urethane polyester coating, electrostatically applied and baked.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • UL listed for wet location under covered ceiling
  • ARRA and BAA compliant

 

D-R24V

Cut Sheet

Right Angle Strip SSA

Available in 24”, 36”, 48”, and 96” lengths in 2 or 3 lamp configurations, T8, T5, and T5HO. Right angle design combines the benefits of the

standard and side mount strips. 2 lamp version gives 90° plane of light. 3-lamp version gives 180° plane of light. Snap on cover makes installation quick and easy. For individual or continuous row mounting.

HOUSING

Die formed heavy gauge steel housing.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

All parts pre-painted with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label.
  • Made in U.S.A.
  • Suitable for damp location.
  • ARRA and BAA compliant.

D-SSA

Cut Sheet

Commercial Grade LED Downlight 5” and 6” – RLEDL ULTRA 5/6

APPLICATIONS

Restaurants, Healthcare, Hospitality, Office, Property Management, Residential, Retail

HOUSING

Standard Heavy Duty Steel Code Grade Construction.
5” housing available.

New construction plaster frame: 7-1/16”W x 10 3/4” L.

New construction has five 1/2”, one 34” and four Romex knockouts.

Hanger bars allow housing to be positioned within 24” joist span and
designed to fit onto T-Bar spine.

New construction adjust for ceilings up to 1-3/8” thick.
6 1/2” ceiling cutout.

New construction has sealed and gasketed construction to limit
air exchange between ceiling plenum.

Performance tested to ASTM-E283 (Washington State).

ELECTRICAL

  • Input Voltage: 120V, Dimmable to 10%
  • Instant On, Power Factor: >0.90
  • LED system Mfg. by Sylvania

LED COLOR

Available in 2700K, 3000K or 4000K

CRI

Up to 84

POWER FACTOR

>0.90

BEAM ANGLE

80 Degrees

LONG LIFE

50,000 hours

CERTIFICATION

  • UL Listed for use in damp location.
  • 5 year warranty. Meets IECC Energy Code
  • CEC compliant
  • Energy Star Rated LED system

 

8.56 spcs

Cut Sheet