Vapor Tight LED Low Bay – VLEDLB2-N

This Vapor Tight LED Low Bay comes standard with stainless steel latches. For pendant mounting. Stainless steel mounting brackets reduce installation time and eliminate the need for mounting holes in fixture body. Stainless steel V hooks simplify pendant mounting with chain or cable. For individual or continuous row with flexible conduit.

HOUSING

Heavy-duty unsaturated fiberglass reinforced polyester housing with poured in place gasketing. Flame class 5VA.

ELECTRICAL

  • <10% THD and include 5 year manufacturer’s warranty
  • Operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

Glass clear diffuser is molded of UV stabilized impact resistant acrylic.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA Compliant
  • IP67 Certified
  • National Sanitation Foundation (NSF) approved components
  • NEMA 4X rated
  • Factory hose-down tested at 1500 PSI, 1.4 gallons/minute @ 12 -24”.
  • 5 Year LED Warranty

 

 

VLEDLB2-N-Vapor-TIght-Low-Bay-d4

Molded Vapor Tight Luminaire – SPVT

The RLE SPVT Molded Vapor Tight is available in 4’, and 8’ lengths, 1, 2 & 3 lamp T8, T5, and T5HO configurations. It’s weather resistant housing makes it ideal for parking garages, food processing areas, refrigerated storage, marinas, or any area where moisture protection is required.

Internal gear tray replaces traditional strip fixture insert, reducing both weight and expense.

Poured-in-place gasket and latches seal the enclosures from most hostile environments. Polycarbonate or stainless steel latches. Tamperproof latches also available.

For surface or pendant mounting. Optional stainless steel snap-in mounting brackets reduce installation time and eliminate mounting holes in fixture body. For individual or continuous row with optional watertight hubs.

HOUSING

Heavy-duty unsaturated polyester housing with foamed in place gasketing. Flame class V-0, 5VA.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

Ribbed diffuser is molded of UV stabilized acrylic/DR blend to resist breakage and maintain flexibility. Optional polycarbonate diffuser available.

CERTIFICATION

  • All units bear UL label
  • Wet Location label for National Sanitation Foundation (NSF) Approval available
  • IP65 rated. IP67 rated when used with 8 latch configuration

 

D-SPVT

Cut Sheet

Molded Vapor Tight Luminaire – VPVT

The VPVT Molded Vapor Tight Luminaire is available in 2’, 4’, and 8’ lengths, 1, 2 and 3 lamp T8, T5, T5HO and LED configurations. The weather-resistant housing is ideal for parking garages, food processing areas, refrigerated storage, marinas, or any area where moisture protection is required. Internal gear tray replaces traditional strip fixture insert, reducing both weight and expense.

Poured-in-place gasket and latches seal the enclosures from most hostile environments. Polycarbonate or stainless steel and tamperproof latches available. Optional stainless steel snap-in mounting brackets reduce installation time and eliminate mounting holes in fixture body. For individual or continuous rows with optional watertight hubs. Optional specular aluminum wide distribution reflector available.

HOUSING

Heavy-duty unsaturated fiberglass reinforced polyester housing with poured in place gasketing. Flame class V-0, 5VA.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

Ribbed diffuser is molded of UV stabilized acrylic/DR blend to resist breakage and maintain flexibility. Optional polycarbonate lens available in 2’ and 4’ only. Water clear lens is also available. Single lamp narrow unit is standard with a polycarbonate lens.

CERTIFICATION

  • All units bear UL wet location label
  • IP67 Certified
  • National Sanitation Foundation (NSF) approved components
  • Manufactured in the U.S.A.
  • ARRA and BAA compliant
  • Passed 1500 PSI high pressure hose-down test
  • Ballasts and fixture operate up to 70° C temperature

 

VPVTLED-d4

Cut Sheet

Molded Vapor Tight Luminaire – VPVTLED

As specified by Whole Foods Market

Available in 2’, 4’, and 8’ lengths, LED tube and board configurations. Weather resistant housing ideal for parking garages, food processing areas, refrigerated storage, marinas, or any area where moisture protection is required. Internal gear tray replaces traditional strip fixture insert, reducing both weight and expense. Poured-in-place gasket and latches seal the enclosures from most hostile environments.

Polycarbonate or stainless steel and tamperproof latches available.

Optional stainless steel snap in mounting brackets reduce installation time and eliminate mounting holes in fixture body.

For individual or continuous row with optional watertight hubs.

Optional specular aluminum wide distribution reflector available.

HOUSING

Heavy duty unsaturated fiber glass reinforced poly- ester housing with poured in place gasketing.

Frame class V-0, 5VA.

ELECTRICAL

  • LED: Highest quality driver, emitters and power supply for long life
  • Must be installed in accordance with NEC code for wet location installation

SHIELDING

Ribbed diffuser is molded of UV stabilized acrylic/DR blend to resist breakage and maintain flexibility. Optional polycarbonate lens available in 2’ and 4’ only. Water clear lens is also available.

CERTIFICATION

  • All units bear UL wet location label
  • LM79 available IP67 Certified
  • National Sanitation Foundation (NSF) approved components
  • Manufactured in the U.S.A.
  • ARRA and BAA compliant
  • Passed 1500 PSI high pressure hose down test

 

 

VPVTLED Cut Sheet

VPVTLED-d4