Parking Garage Luminaire – CVALED48

The Surface Mount CVALED48 is designed specifically for parking garage applications and is available in 48W LED, operates on 120-277V technology, and offers an unprecedented lamp life.

This fixture is vandal-resistant and mounts on wall or ceiling. It is designed to provide long life and high reliability in environments where an extra level of protection and security is required. The housing can be mounted directly over a standard 4″ outlet box or surface wired through ½” conduit. Suitable for wet locations, these lights are typically mounted 8-14 feet high.

HOUSING

Durable die-cast aluminum with ½” threaded conduit entries for surface wiring. A continuous one-piece gasket ensures a weather tight seal

LENS

Clear Prismatic polycarbonate diffuser with UV inhibitors

FINISH

Dark bronze powder paint finish is standard*

FEATURES

  • Uses up to 88% less energy when compared to the HID equivalent
  • Instant on/off operation
  • Resistant to shock and vibration
  • Surge protection
  • Unique optical design 5700K color temperature
  • Produces no UV radiation
  • Contains no mercury

CERTIFICATION

  • Suitable for wet location
  • Made in U.S.A.
  • ARRA and BAA compliant
  • UL listed
  • 5 year warranty

D-8.41-CVALED-Garage

Weatherproof Exit Light X6R–WL

LED powered exit sign features an enclosure resistant to corrosive atmospheres, non hazardous dust environments, water spray or splashing

water. Universal operation. Available in AC only or self powered. Removable directional chevrons. Optional 2 headed unit and unit with green letters. Self Powered Emergency models provided with solid state charging system and maintenance free batteries.

HOUSING

ABS, corrosion resistant UV stabilized enclosure.

ELECTRICAL

2.5 watt LED with life expectancy of 100,000 hours.

CERTIFICATION

  • All units bear UL label.
  • Approved for wet location.
  • Meets or exceed NFPA Life Safety 101, NEC, OSHA, and most state and local codes.

 

X6R-WL-d2

 

Cut Sheet

All-Purpose Exit Light – X6R

The X6R All-Purpose Exit Light is a slim, easy-to-install unit. It is a compact, all-in-one, snap-together unit.
The light source is red LED technology, which provides uniform illumination.
These units are provided with ultra-bright LED diodes.

This reliable and cost-efficient fixture is ideal for any commercial or industrial application where high performance and contemporary design is required.

Universal mounting single or double-face for ceiling end or back mount. Includes canopy and extra face.

Standard white housing. Available option is black housing.
To meet various local codes, units are also available with optional green letters.
Knockouts provided for left, right, and double face arrows.
Emergency models provided with solid state charging system and maintenance free batteries.
Optional with remote capabilities.

HOUSING

Housing is constructed of thermoplastic material. Optional steel and cast aluminum housings.

EMERGENCY MODELS

Supplied with replaceable, sealed Nickel-Cadmium battery.
Provides a minimum of 90 minutes of continuous emergency illumination.

CERTIFICATION

  • All units bear UL label
  • Meets or exceed NEC, OSHA, NFPA, and most state and local codes
  • New York City and Chicago approved units available
  • Suitable for damp locations

 

X6R

Cut Sheet

Ultra-Shallow Under Cabinet – LI

The LI Ultra-Shallow Under-Cabinet Light is available in 12”, 21”, 22”, 24”, 33”, 34”, 42” and 46” lengths.
The unit has an ultra-thin profile, specification grade under cabinet fixture.

Offers efficient on-task illumination in areas obscured from overhead lighting.

For individual or continuous row mounting. One-piece unitized wireway contains all electrical components.

Keyhole slots for ease of installation. Special 5/8” connector supplied to facilitate wiring.
Optional rocker switch, convenience outlet and cord and plug to meet any mounting requirement.

HOUSING

Die-formed heavy gauged steel. Housing and ends are one piece.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

Snap-in ribbed opal lens for soft pleasing light is standard. Optional task lighting lens with opaque front and ribbed bottom.

FINISH

Standard finish is baked white enamel. Optional finishes are oak, walnut, and chrome. Interior reflecting surfaces are baked white enamel with a minimum 89% reflectance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

LI

Cut Sheet

Edge-Lit Exit Sign – EDG

The EDG Edge-Lit Exit Sign is a slim, easy to install unit utilizing highly efficient LED units provided with ultra bright diodes.

This reliable, cost-efficient unit is ideal for any commercial or industrial application where high performance and contemporary design is desired.

Available in single or double-face for ceiling or wall mount. Includes canopy. Directional chevrons are advised. Total energy consumption of 3 watts. Test switch and indicator light located at end of unit.

To meet various local codes, units are also available with optional green letters, 8” letters, or flashers. Automatic low-voltage disconnect, brownout protection emergency models provided with solid-state charging system and maintenance-free lead calcium batteries.

HOUSING

Anodized extruded aluminum housing. Clear acrylic face. Optional white or mirrored face.

ELECTRICAL

LEDs have a 25 year life expectancy and utilize only 3 watts

CERTIFICATION

  • All units bear UL label
  • Made in the U.S.A. label
  • Meets or exceed NEC, OSHA, NFPA and most state and local codes

 

EDG

Cut Sheet

Self-Contained Emergency Light – AA2

The AA2 Self-Contained Emergency Lights are compact and efficient.

This unit is ideal for public, commercial, and industrial facilities with varied unit load requirements.

Plastic incandescent heads are standard. Metal or weatherproof heads are available options.
Automatic, temperature-compensated, pulse type charger.
High-capacity, automatic, instantaneous transfer relay in a dust-tight enclosure.
Low voltage disconnect prevents over-discharge of battery.
Automatic brownout protection is standard. Test switch and indicator pilot light are standard.

Available with 3 wire cord and plug assembly. Wire guard is optional.

HOUSING

High-impact, injection molded thermoplastic, scratch and corrosion-resistant. Optional 20 gauge die-formed steel housings.

BATTERY

Standard 6 volt, maintenance free, seal lead calcium ballast for 120V/277V system.
Optional with remote capabilities.

FINISH

Architectural mist white. LAMPS Par 36 5.4 watt high intensity tungsten lamps are standard.

CERTIFICATION

  • All units bear UL label
  • Made in the U.S.A. label
  • Meets or exceed NEC, OSHA, NFPA, and most state and local codes

 

AA2

Cut Sheet