Linear Architectual Wraparound – LAWLED

The LAWLED Linear Architectual Wraparound is available in 4’ LED Flat Board Array. The versatility of this high efficiency linear, contemporary-styled unit makes it ideal for classrooms, offices, corridors, laboratories, and any application where high efficiency, task appropriate illumination is essential.

For individual or continuous row mounting. Sufficient knockouts for surface or pendant mounting.

HOUSING

Die formed heavy gauge steel unitized into one piece.

SHIELDING

Acrylic frosted.

FINISH

Post painted in powder coated flat white polyester.

CERTIFICATION

  • All units bear UL label
  • Suitable for damp locations
  • Made in U.S.A.
  • ARRA and BAA compliant
  • 5 Year LED Warranty

8.57 LAWLED sepc

 

Cut Sheet

Flat Board, Single or Dual LED Channel – SLED

The SLED Flat Board is available in 24″, 36″, 48″, 72″ and 96″ lengths in Flat Board, 1 or 2 LED tubes lamp configurations.

Combination snap-in end plates double as couplers, eliminating the need for extra hardware in continuous row applications. Snap-on cover makes installation quick and easy. Suitable for low density ceiling applications.

Symmetric, asymmetric, and light shield reflectors available. For surface or pendant mounting, individual or continuous row mounting.

Available with specular aluminum reflector (87% reflectance), high efficiency white reflector (92% reflectance), or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die-formed heavy gauge steel housing with ample knockouts for east of installation.

ELECTRICAL

LED: Highest quality driver, emmitters and power supply for long life.

FINISH

All parts finished with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

S Spec Sheet

Cut Sheet

Enclosed Drum Luminaire – ACU

The ACU Enclosed Drum luminaire has an opal diffuser that envelops the fixture housing in a smooth architectural line, with accent on simplicity of design. Available in two different sizes (14” and 16”).

Designed for ceiling or wall surface mounting. Also available in optional white powder coated finish.

HOUSING

Die-formed, heavy gauge steel housing.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

Soft white acrylic diffuser.

FINISH

Satin nickel finish is standard. Optional white powder coat finish available.

CERTIFICATION

  • Suitable for damp location
  • Made in U.S.A.
  • BAA and ARRA compliant
  • UL listed

 

D-ACU

Cut Sheet

Low Profile, High Efficiency Wraparound – CAW

The CAW Wraparound is available in 2’ and 4’ lengths in T8 and T5. The unique body design produces a slender and low profile appearance.

Suitable for most standard and low density ceiling applications. 100% clear acrylic prismatic diffuser hinges from either side. Flat bottom and linear ribbed sides provide excellent light control. Integral embossed white end plates with flush knockouts make fixtures for individual or continuous row mounting. For pendant or surface mounting.

HOUSING

Die-formed, heavy gauge steel housing and ends unitized into one piece.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

FINISH

All parts are finished with high gloss baked white enamel with minimum 89% reflectance, applied over iron phosphate pretreatment, for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Suitable For damp location
  • Made in U.S.A.
  • ARRA and BAA compliant

 

D-CAW

 

RLE-CAW-Spec-Sheet

 

 

Cut Sheet

Soft Surface Designer Series – CPX

Available in 1×2, 1×4, 2×2, 2×4 sizes, in 2, 4, and 6 lamp configurations, T5, T8 and BIAX.

One piece seamless cast acrylic diffuser provides uniform light diffusion with minimal brightness and contrast. Diffuser hinges from either side with no visible hardware. Matte black finish of the housing further disguises the shallow depth of the fixture. Also available in all white housing as an option. Designed for individual, surface, or pendant mount.

HOUSING

Die-formed heavy gauge steel housing welded into one piece for maximum strength.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

Premium coated baked white enamel paint used on all reflecting interior surfaces. Matte black baked enamel on all exterior surfaces.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-CPX

Cut Sheet

Soft Surface Designer Series – CPXN

The CPXN is available in 1×4, and 1.5 x 4 sizes, in 2 and 4 lamp configurations, T8 and T5.

The one-piece, seamless cast acrylic diffuser provides uniform light diffusion with minimal brightness and contrast. Diffuser snaps in and out for easy maintenance. Unique floating diffuser design hinges from either side with no visible hardware. Designed for surface or pendant mount.

HOUSING

Die-formed heavy gauge steel housing welded into one piece for maximum strength.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

FINISH

Premium powder coated, baked white enamel paint used on all reflecting interior surfaces.

CERTIFICATION

  • All units bear UL label
  • Suitable for damp location
  • Made in U.S.A.
  • ARRA and BAA compliant

 

D-CPXN

Cut Sheet

Enclosed Drum Luminaire – JO

The JO Drum Luminaire is a contemporary-styled fixture for energy efficient PL lamps, circlines and 2D lamps.

An opal diffuser envelops the housing in a smooth architectural line with accent on simplicity of design.
Three different sizes (11”, 14”, 19”) accommodate a large variety of lamp combinations.
Deep housing supplied for all emergency pack or higher wattage (18W or 26W) PL lamps.
Designed for ceiling or wall surface mounting. Optional tamperproof hardware.

HOUSING 

Die-formed heavy gauge steel housing.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards.
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty.
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDINGS

Soft white acrylic diffuser is standard. Optional white polycarbonate, fluted acrylic, and mushroom acrylic.

FINISH

Housing is finished inside and out with premium grade, baked white enamel with a minimum reflectance of 89%.
Optional black paint available for housing exterior.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-JO

Cut Sheet

Enclosed Square Luminaire SJO

Contemporary design luminaire for energy-efficient PL lamps, circlines and 2D lamps. 

Opal diffuser envelops fixture housing in a smooth architectural line with the accent on simplicity of design. Three sizes (11”, 14”, 19”) accommodate a large variety of lamp combinations. Deep-housing supplied for all emergency pack or higher wattage (18W or 26W) PL lamps. Designed for ceiling or wall surface mounting. Optional tamperproof hardware.

HOUSING

Die-formed, heavy gauge steel housing.

ELECTRICAL

Energy-saving and electronic class P, HPF ballasts comply with Federal Energy Efficiency standards.

SHIELDINGS

Soft white acrylic diffuser is standard. Optional white polycarbonate.

FINISH

Housing is finished inside and out with premium grade, baked white enamel with a minimum reflectance of 89%. Optional black paint for housing exterior is available.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

D-SJO

Cut Sheet

Entrance/Walkway Light – CWPC

The CWPC is ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, and tunnels.

Heavy-duty die-cast aluminum construction with powder coated finish. Heat and impact resistant tempered glass lenses. One piece designed anodized aluminum reflector for optimum light efficiency. Silicon rubber seal prevents leakage. Available as downlight only or up and downlight. Lamping up to 150W PSMH,150W HPS and compact fluorescent up to 42W available.

HOUSING

Heavy-duty die cast aluminum housing.

ELECTRICAL

  • Optimized for 150W MH and 150W HPS
  • Standard with 120V, 277V, or multi-tap ballast
  • High Power Factor and other voltages/lamp options are also available

FINISH

Powder coated architectural bronze is standard. Customer colors are available upon request.

CERTIFICATION

  • All units bear UL label
  • Listed for wet location
  • Made in U.S.A.

 

D-CWPC

Cut Sheet

Entrance/Walkway Light – CWPD

The CWPD is ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, and tunnels. Heavy-duty die-cast aluminum construction with powder coated finish. Heat and impact resistant tempered glass lenses. One-piece designed anodized aluminum reflector for optimum light efficiency.

Silicon rubber seal prevents leakage. Standard wide throw reflector. Available as downlight only. Lamping up to 150W PSMH or 150W HPS and compact fluorescent 2-42W available.

HOUSING

Heavy-duty die cast aluminum housing.

ELECTRICAL

  • Optimized for 150W PSMH and 150W HPS
  • Standard with 120V, 277V, or multi-tap ballast
  • High Power Factor and other voltages/lamp options are also available

FINISH

Powder coated architectural bronze is standard. Other finishes are available upon request.

CERTIFICATION

  • All units bear UL label
  • Listed for wet location
  • Made in U.S.A.

 

D-CWPD

Cut Sheet