2-Lamp T5 Strip – ST2

The ST2 is available in nominal 2’, 3’ and 4’ lengths in 1 or 2-lamp configurations, T5 or T5-HO.

Fully-assembled housing designed for individual or continuous row mounting. Predrilled mounting holes for easy installation. Can be fed through end or back of unit. Suitable for low density ceiling applications.

Symmetric, asymmetric, and light shield and swivel adjustable reflectors available.

Available with specular aluminum reflector (87% reflectance), high-efficiency white reflector (92% reflectance), or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die-formed, heavy gauge steel housing with ample knockouts for ease of installation.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

FINISH

All parts pre-painted with high gloss, baked white enamel with minimum 89% reflectance, applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-ST2

Cut Sheet

Side Socket Channel Light – SS

The SS Side Socket Channel Light is available in 24”, 36”, 48″ and 96” lengths, in 1 and 2 lamp configurations, T8, T5 and T5HO.

The ultra-thin design is ideal for cove, coffer, and under counter applications. The snap-on cover makes installation quick and easy.

Knockouts on channel ends allow for through wiring or end feed. For individual or continuous row mounting.

HOUSING

Die formed heavy gauge steel housing.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

FINISH

All metal parts pre-painted with high gloss, baked white enamel with minimum 89% reflectance, applied over iron phosphate pretreatment, for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-SS

Cut Sheet

Single Or Dual Lamp Channel – S

This unit is available in 24”, 36”, 48”, 72” and 96” lengths in 1 or 2 lamp configurations, T5, T5HO, and T8.

Combination snap-in end plates double as couplers, eliminating the need for extra hardware in continuous row applications. Snap-on cover makes installation quick and easy.

Suitable for low density ceiling applications. Symmetric, asymmetric, and light shield reflectors available.

For surface or pendant mounting, individual or continuous row mounting. Available with specular aluminum reflector (87% reflectance), high efficiency white reflector (92% reflectance), or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die-formed heavy gauge steel housing with ample knockouts, for ease of installation.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

FINISH

All parts finished with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-S

Cut Sheet

Mini Staggered Lamp Strip – MSG

The MSG Mini Staggered Lamp Strip is available in T8, T5 and T5 HO 1 and 2 lamp configurations.

Ideal for cove or cornice lighting wherever uniform, uninterrupted illumination is necessary.

The 3” lamp staggers eliminate dark spots caused by back-to-back sockets on standard strips.

Optional side mount lamps where space is extremely limited. Optional symmetrical, asymmetrical, and light shield reflectors available.

For surface or pendant mounting, individually or in continuous row.

HOUSING

Die-formed heavy gauge steel welded for maximum strength.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

FINISH

All metal parts are post-painted with premium grade white enamel with minimum 89% reflectance, applied over iron phosphate pretreatment, for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-MSG

Cut Sheet

Fluorescent High Bay – FLHB-IOC

The FLHB-IOC Fluorescent High Bay is available in T8, T5, T5 HO, in 3, 4, 6 or 8 lamp configurations.

Ideal for factories, warehouses, and gymnasiums where flying objects may be a problem.

The sensor is flush-mounted to avoid breakage. An enhanced aluminum reflector maximizes light output while offering high efficiency. Available with framed wire guard and/or clear or prismatic lens for areas that require lamp protection.

Pendant mounting (for chain or cable) standard.

Optional mono-point hub/splice box for simplified HID replacements.
Unit comes standard with open bottom.
Optional provisions for dimming/HI-LO controllable systems for additional energy savings.

HOUSING

Die-formed 20 gauge steel with knockouts for stem, cable, or chain hangers.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise
  • All T5HO units come standard with 90C-rated ballasts

FINISH

All metal parts are pre-painted with high-gloss, baked white enamel with minimum 89% reflectance, applied over iron phosphate pretreatment for maximum adhesion and rust resistance.
Post-painted door frame and ends standard. Post painted units finished in gloss white powder coat.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • ARRA and BAA compliant

 

D-FLHB-IOC

Cut Sheet

Fluorescent High Bay – FLHB

The RLE FLHB is available in T8, T5, T5 HO, in 3, 4, 6 or 8 lamp configuration. Also available in 10 lamp T8 or T5HO.

Ideal for factories and warehouses where high levels of illumination are required.

Enhanced aluminum reflector maximizes light output while offering high efficiency.

Pendant mounting (for chain or cable) standard. Optional quick connect hook with 24” cord and NEMA twist plug for chain hanging.

Unit comes standard with open bottom. Available with framed wire guard and/or clear or prismatic lens for areas that require lamp protection.

Optional mono-point hub/splice box for simplified HID replacements. Optional provisions for dimming/HI-LO controllable systems for additional energy savings.

HOUSING

Die formed heavy gauge steel with knockouts for stems or chain hangers.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise
  • All T5HO units come standard with 90C rated ballasts

FINISH

All metal parts are pre-painted with high-gloss, baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance. Post-painted units finished in gloss white powder coat.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • ARRA and BAA compliant

 

D-FLHB

Cut Sheet

Fluorescent High Bay – EFLHB

The EFLHB is designed for energy-efficient replacement of Metal Halide and High Pressure Sodium Fixtures.

Available in T-8, T-5, T-5 HO, 4 lamp and 6 lamp configurations.

Ideal for factories and warehouses where high levels of illumination are required. Miro-4 reflector maximizes light output while offering high efficiency. White reflector also available for low bay applications.

Pendant mounting (for chain or cable) standard. Optional quick connect hook with 24” cord and NEMA twist plug for chain hanging.

Optional provisions for dimming/HILO controllable systems for additional energy savings.

HOUSING

Cold Rolled Steel. Finished in baked white enamel.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

REFLECTOR

Miro-4 reflector designed specifically for lamp quantity chosen (4 or 6). White reflector available. Optional uplight reflector also available.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-EFLHB

Cut Sheet

Cross Staggered Lamp Strip – CSG

The CSG Cross-Staggered Lamp Strip is available in T5 and T5 HO 1 lamp configurations, in nominal 2’, 3’ and 4’ lengths.

Ideal for cove or cornice lighting where uniform, uninterrupted illumination is necessary. The 6” lamp stagger eliminates dark spots caused by back-to-back sockets on standard strips.

Optional symmetrical, asymmetrical, and light shield reflectors available. Tandem pair configurations available to simplify field installation.

HOUSING

Die-formed 20 gauge steel welded for maximum strength.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

FINISH

Post-painted with premium grade white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-CSG

Cut Sheet

General Purpose Industrial – 391

The RLE General Purpose Industrial 391 is available in 2’, 3’, 4’, 8’, and 16’ lengths, and in 1, 2, and 3 lamp configurations, T5, T8, T5HO, T12HO and T12VHO.

4’ transverse ribbed reflector designed for maximum rigidity. Snap-on end plate can double as a coupler for continuous row installation. For individual or continuous row mounting.

Reflector aligners are supplied with 8’ units. Optional half reflector available for asymmetrical applications.

This fixture is available with specular aluminum reflector (87% reflectance), high efficiency white reflector (92% reflectance), or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die-formed heavy gauge steel with knockouts for stems or chain hangers.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

FINISH

All metal parts are pre-painted with high-gloss, baked white enamel with minimum 89% reflectance, applied over iron phosphate pretreatment for maximum adhesion and rust-resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Damp location label optional
  • ARRA and BAA compliant

 

D-391

Cut Sheet

Slimline/Rapid Start Channel Light – 9

The Slimline/Rapid Start Channel is available in 2’, 3’, 4’, 6’ and 8 lengths, in 1, 2, 2 and 3 lamp configurations. Combination snap-in end plates double as couplers, and eliminate the need for extra hardware in continuous row applications. Snap-on cover makes installation quick and easy.

For surface, pendant, or chain mounting, individual or continuous rows. Symmetric, asymmetric, and wall wash reflectors available.

This unit is available with a specular aluminum reflector (87% reflectance), high efficiency white reflector (92% reflectance), or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die-formed heavy gauge steel with knockouts for stems or chain hangers.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

FINISH

All metal parts are pre-painted with high-gloss baked white enamel, with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Damp location label optional
  • Made in U.S.A.
  • ARRA and BAA compliant

 

D-9

Cut Sheet