Parking Garage Luminaire – CVALED48

The Surface Mount CVALED48 is designed specifically for parking garage applications and is available in 48W LED, operates on 120-277V technology, and offers an unprecedented lamp life.

This fixture is vandal-resistant and mounts on wall or ceiling. It is designed to provide long life and high reliability in environments where an extra level of protection and security is required. The housing can be mounted directly over a standard 4″ outlet box or surface wired through ½” conduit. Suitable for wet locations, these lights are typically mounted 8-14 feet high.

HOUSING

Durable die-cast aluminum with ½” threaded conduit entries for surface wiring. A continuous one-piece gasket ensures a weather tight seal

LENS

Clear Prismatic polycarbonate diffuser with UV inhibitors

FINISH

Dark bronze powder paint finish is standard*

FEATURES

  • Uses up to 88% less energy when compared to the HID equivalent
  • Instant on/off operation
  • Resistant to shock and vibration
  • Surge protection
  • Unique optical design 5700K color temperature
  • Produces no UV radiation
  • Contains no mercury

CERTIFICATION

  • Suitable for wet location
  • Made in U.S.A.
  • ARRA and BAA compliant
  • UL listed
  • 5 year warranty

D-8.41-CVALED-Garage

Enclosed Drum Luminaire – ACU

The ACU Enclosed Drum luminaire has an opal diffuser that envelops the fixture housing in a smooth architectural line, with accent on simplicity of design. Available in two different sizes (14” and 16”).

Designed for ceiling or wall surface mounting. Also available in optional white powder coated finish.

HOUSING

Die-formed, heavy gauge steel housing.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

Soft white acrylic diffuser.

FINISH

Satin nickel finish is standard. Optional white powder coat finish available.

CERTIFICATION

  • Suitable for damp location
  • Made in U.S.A.
  • BAA and ARRA compliant
  • UL listed

 

D-ACU

Cut Sheet

Low Profile, High Efficiency Wraparound – CAW

The CAW Wraparound is available in 2’ and 4’ lengths in T8 and T5. The unique body design produces a slender and low profile appearance.

Suitable for most standard and low density ceiling applications. 100% clear acrylic prismatic diffuser hinges from either side. Flat bottom and linear ribbed sides provide excellent light control. Integral embossed white end plates with flush knockouts make fixtures for individual or continuous row mounting. For pendant or surface mounting.

HOUSING

Die-formed, heavy gauge steel housing and ends unitized into one piece.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

FINISH

All parts are finished with high gloss baked white enamel with minimum 89% reflectance, applied over iron phosphate pretreatment, for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Suitable For damp location
  • Made in U.S.A.
  • ARRA and BAA compliant

 

D-CAW

 

RLE-CAW-Spec-Sheet

 

 

Cut Sheet

Soft Surface Designer Series – CPX

Available in 1×2, 1×4, 2×2, 2×4 sizes, in 2, 4, and 6 lamp configurations, T5, T8 and BIAX.

One piece seamless cast acrylic diffuser provides uniform light diffusion with minimal brightness and contrast. Diffuser hinges from either side with no visible hardware. Matte black finish of the housing further disguises the shallow depth of the fixture. Also available in all white housing as an option. Designed for individual, surface, or pendant mount.

HOUSING

Die-formed heavy gauge steel housing welded into one piece for maximum strength.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

FINISH

Premium coated baked white enamel paint used on all reflecting interior surfaces. Matte black baked enamel on all exterior surfaces.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-CPX

Cut Sheet

Soft Surface Designer Series – CPXN

The CPXN is available in 1×4, and 1.5 x 4 sizes, in 2 and 4 lamp configurations, T8 and T5.

The one-piece, seamless cast acrylic diffuser provides uniform light diffusion with minimal brightness and contrast. Diffuser snaps in and out for easy maintenance. Unique floating diffuser design hinges from either side with no visible hardware. Designed for surface or pendant mount.

HOUSING

Die-formed heavy gauge steel housing welded into one piece for maximum strength.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

FINISH

Premium powder coated, baked white enamel paint used on all reflecting interior surfaces.

CERTIFICATION

  • All units bear UL label
  • Suitable for damp location
  • Made in U.S.A.
  • ARRA and BAA compliant

 

D-CPXN

Cut Sheet

Enclosed Drum Luminaire – JO

The JO Drum Luminaire is a contemporary-styled fixture for energy efficient PL lamps, circlines and 2D lamps.

An opal diffuser envelops the housing in a smooth architectural line with accent on simplicity of design.
Three different sizes (11”, 14”, 19”) accommodate a large variety of lamp combinations.
Deep housing supplied for all emergency pack or higher wattage (18W or 26W) PL lamps.
Designed for ceiling or wall surface mounting. Optional tamperproof hardware.

HOUSING 

Die-formed heavy gauge steel housing.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards.
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty.
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDINGS

Soft white acrylic diffuser is standard. Optional white polycarbonate, fluted acrylic, and mushroom acrylic.

FINISH

Housing is finished inside and out with premium grade, baked white enamel with a minimum reflectance of 89%.
Optional black paint available for housing exterior.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-JO

Cut Sheet

Enclosed Square Luminaire SJO

Contemporary design luminaire for energy-efficient PL lamps, circlines and 2D lamps. 

Opal diffuser envelops fixture housing in a smooth architectural line with the accent on simplicity of design. Three sizes (11”, 14”, 19”) accommodate a large variety of lamp combinations. Deep-housing supplied for all emergency pack or higher wattage (18W or 26W) PL lamps. Designed for ceiling or wall surface mounting. Optional tamperproof hardware.

HOUSING

Die-formed, heavy gauge steel housing.

ELECTRICAL

Energy-saving and electronic class P, HPF ballasts comply with Federal Energy Efficiency standards.

SHIELDINGS

Soft white acrylic diffuser is standard. Optional white polycarbonate.

FINISH

Housing is finished inside and out with premium grade, baked white enamel with a minimum reflectance of 89%. Optional black paint for housing exterior is available.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

D-SJO

Cut Sheet

4×4 Recessed Luminaire G44

Available in standard 2′, 3′, 4’ and 8′ length, in 1 and 2 lamp configurations, T5 and T8. Designed for mounting in grid ceiling.

Also available as surface mount (S44), and with integral 1/2″ flange for gypsum ceilings (M44). 4”x 4” narrow design is ideal for installation in corridors, lobbies, and office areas, where space is limited. Optional asymmetrical distribution with integral reflector. Individual and continuous row for both surface and pendant mounting. Alignment joiners are provided for continuous row installation.

HOUSING

Die-formed, welded heavy gauge cold rolled steel. ½” flange is provided for gypsum ceilings if required. Optional aluminum housing.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless otherwise specified.

SHIELDING

Acrylic prismatic is standard. Optional white cross baffle and parabolic semi-specular cross-baffle are also available. Please contact us for additional shielding options.

FINISH

All metal parts are post-painted with premium grade white enamel, with a minimum 89% reflectance applied over iron phosphate pretreatment, for maximum adhesion and rust resistance. Custom colors are available upon request.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

D-G44

Cut Sheet

NYC Approved, Recessed Grid Troffer – ES85

The ES85 is available in 1×4, 2×2, 2×4, T8, T5 and T5HO. Flush, steel-hinged and latched doorframe, screw-assembled for simple diffuser replacement.

Integral, metal-to-metal light seal channels eliminate light leakage on all four sides. Fixture housing flanges rolled to eliminate sharp edges. Integral T-bar clips on 2×4 fixtures quickly secure fixture to the grid system without the need for external parts.

Engineered ballast compartment for maximum heat dissipation. Available with specular aluminum reflector (87% reflectance), high efficiency white reflector (92% reflectance), or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die-formed, 20 gauge steel unitized into one piece. NYC approved.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless otherwise specified

SHIELDING

100% virgin acrylic prismatic is standard. Call or consult option sheet for other shielding.

FINISH

All parts are finished with high-gloss, baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment, for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-ES85

Cut Sheet

Shallow Parabolic Recessed Troffer – PKL

The PKL is available in 1×4, 2×2, and 2×4 sizes, in 2, 3, and 4 lamp, T5, T5HO, and T8 and BIAX in a variety of cell configurations.

1-1/2” deep, anodized aluminum, parabolic contoured louver provides optimum performance and efficiency, while ensuring a high level of visual comfort. Flush steel-hinged and latched door frame. Frame hinges from either the open or closed position by die formed steel hinges. Integral T-Bar clips on 2×4 and 2×2 fixtures quickly, securing fixture to the grid system without the need for external parts.

Fixture housing flanges rolled to eliminate sharp edges. Optional heat removal housing for venting air into plenum. For mounting in exposed T-Bar (grid) ceiling. Optional flanged construction for other ceiling types. For individual or continuous row mounting.

Available with specular aluminum reflector (87% reflectance), high efficiency white reflector (92% reflectance), or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die-formed heavy gauge steel unitized into one piece. Standard unit supplied as static with flush steel door. Optional 20 gauge housing.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards.
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty.
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

Anodized aluminum louver, precision mitered. Standard finish semi-specular silver. Optional specular silver or white finishes are available.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-PKL

Cut Sheet