Entrance/Walkway Light – CWPE

The CWPE Entrance and Walkway Light it ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, and tunnels.

The heavy-duty die-cast aluminum construction is paired with heat and impact-resistant tempered glass lenses. Powder coated finish on cast aluminum housing. The one-piece anodized aluminum reflector is designed for optimum light efficiency. Silicon rubber seal prevents leakage. Rotatable wide throw reflector.

Designed for downlighting or uplighting installations. Quick install mounting bracket included.

Lamping up to 150W MH or 150W HPS and compact fluorescent up to 2- 42W available.

HOUSING

Heavy-duty die cast aluminum housing.

ELECTRICAL

  • Optimized for 150W PSMH and 150W HPS
  • Standard with 120V, 277V, or Multi-tap ballast
  • High Power Factor and other voltages/lamp options are also available

FINISH

Powder coated architectural bronze is standard. Other finishes are available upon request.

CERTIFICATION

  • All units bear UL label
  • Listed for wet location
  • Made in U.S.A.

 

D-CWPE

Cut Sheet

Medium Flood Light – FL

The FL Medium Flood Light (shown with Yoke Mount) has a die cast aluminum housing with an integral hinging feature for ease of maintenance.

This unit is ideal for buildings, parks, signage, sports field, parking areas or anywhere general floodlighting is desired.

The tempered glass provides maximum light distribution. An optional polycarbonate shield or wire guard for vandalproof protection is available. An anodized aluminum reflector is designed in conjunction with the diffuser for maximum efficiency. Heavy-duty adjustable yoke for excellent directional aiming capabilities. Fully-gasketed, weather-resistant construction.

For wall or ceiling mounting. Designed for max of 400w metal halide or high-pressure sodium.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

  • For metal halide lamping, ballast is high power factor, constant wattage auto-transformer
  • Electrical components are mounted to cast aluminum housing for optimum heat dissipation
  • For high pressure sodium, ballast is normal power factor reactor type for 120V
  • High power factor, multi-tap, and most fixed voltages available

SHIELDING

Tempered glass is standard.

FINISH

Exterior housing is finished in architectural bronze as standard. Available in custom colors.

CERTIFICATION

  • UL and CUL listed for wet locations

 

D-FL

Cut Sheet

Horizontal Wall Pack – HWP

The HWP Horizontal Wall Light is made of a die cast aluminum base plate with conduit access and a corrosion-resistant housing. A one-piece anodized aluminum reflector is designed in conjunction with the diffuser for maximum efficiency. Threaded apertures for conduit and optional photocell. Fully-gasketed, weather-resistant construction.

For wall mounting directly over standard 4” outlet box or with surface conduit. Optional tamperproof hardware is available.

HOUSING

High impact polycarbonate housing.

ELECTRICAL

  • For metal halide lamping, ballast is high power factor, constant wattage auto transformer
  • Electrical components are mounted to cast aluminum housing for optimum heat dissipation
  • For high pressure sodium, ballast is normal power factor reactor type for 120V
  • High power factor, multi-tap, and most fixed voltages available

FINISH

Baked on premium architectural bronze for maximum durability.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • Suitable for wet location

 

D-HWP

Cut Sheet

Exterior Wall Bracket – RWB

The RWB exterior light features a die cast aluminum housing with integral hinging feature for ease of maintenance. The borosilicate prismatic glass is optically designed for optimum light distribution.

A textured anodized aluminum reflector is designed in conjunction with diffuser for maximum efficiency. Threaded apertures for conduit and optional photocell.

The unit is fully-gasketed with weather-resistant construction.

Wall mount directly over standard 4” outlet box or with surface conduit. Optional stainless steel wire guard. Optional tamperproof hardware.

HOUSING

Rugged, die-cast aluminum housing.

ELECTRICAL

  • For metal halide lamping ballast is high power factor, constant wattage auto transformer
  • Electrical components are mounted to cast aluminum housing for optimum heat dissipation
  • For high-pressure sodium, ballast is normal power factor reactor type for 120V
  • High power factor, multi-tap, and most fixed voltages available

SHIELDING

Borosilicate glass is standard. Wire guard available.

FINISH

Baked on premium architectural bronze for maximum durability.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.

 

D-RWB

 

Cut Sheet

Cast Aluminum Exterior Wall Bracket – WB

The WB Exterior Wall Bracket Light has a die-cast aluminum housing with an integral hinging feature for ease of maintenance. The borosilicate prismatic glass is optically-designed for optimum light distribution.

Optional polycarbonate shield or wire guard for vandalproof protection is available. Textured anodized aluminum reflector designed in conjunction with diffuser for maximum efficiency. Threaded apertures for conduit and optional photocell provided for the flexibility during installation. Fully-gasketed, weather-resistant construction.

For wall mounting directly over standard 4” outlet box or with surface conduit.
This fixture’s compact size is ideal for lamping up to 175W metal halide.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

  • Fluorescent: Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise
  • HID: Ballast is pre-wired, CWA HPF, core and coil with dry film capacitor and starter (if required)

SHIELDING

Borosilicate glass is standard.

FINISH

Baked-on premium architectural bronze for maximum durability is standard.

CERTIFICATION

  • All units bear UL label
  • UL listed for wet and damp locations
  • Made in U.S.A.
  • ARRA compliant

 

D-WB

Cut Sheet

Exterior Wall Bracket – WBB

RLE’s WBB Exterior Light features a die-cast aluminum housing with integral hinging feature for ease of maintenance. The borosilicate prismatic glass is optically-designed for optimum light distribution. Optional polycarbonate shield or wire guard for vandalproof protection is available.

The textured anodized aluminum reflector is designed in conjunction with the diffuser for maximum efficiency. Threaded apertures for conduit and optional photocell are provided for flexibility during installation.

This unit is fully-gasketed with weather-resistant construction.

For wall mounting directly over standard 4” outlet box or with surface conduit. Sizing is ideal for lamping of 100w to 250w metal halide or high-pressure sodium.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

  • Fluorescent: Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise
  • HID: Ballast is pre-wired, CWA HPF, core and coil with dry film capacitor and starter (if required)

SHIELDING

Borosilicate glass is standard.

FINISH

Baked on premium architectural bronze for maximum durability.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • ARRA compliant

 

D-WBB

Cut Sheet

Exterior Wall Bracket – WBC

The WBC Exterior Wall Bracket Light features a die cast aluminum housing with integral hinging feature for ease of maintenance. The borosilicate prismatic glass has been optically-designed for optimum light distribution.

An optional polycarbonate shield is available for vandalproof protection over the glass refractor. The textured anodized aluminum reflector is designed in conjunction with diffuser for maximum efficiency. Threaded apertures for conduit and optional photocell.

The WBC is fully-gasketed with weather-resistant construction.

For wall mounting directly over standard 4” outlet box or with surface conduit.

Optional stainless steel wire guard and or tamperproof hardware is available for vandal resistance.

Ideal for use in wattages of up to 250w to 400w metal halide or high pressure sodium.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

HID: Ballast is pre-wired, CWA HPF, core and coil with dry film capacitor and starter (if required).

SHIELDING

Prismatic borosilicate glass is standard.

FINISH

Baked-on premium architectural bronze for maximum durability.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • ARRA compliant

 

D WBC

Cut Sheet

Cast Aluminum Exterior Wall Bracket – WPE

The WPE Exterior Light features a die-cast aluminum housing with integral hinging for ease of maintenance. An optional polycarbonate shield or wire guard for vandalproof protection is available. Textured anodized aluminum reflector designed in conjunction with diffuser for maximum efficiency. Threaded apertures for conduit and optional photocell provided for the flexibility during installation.

Fully-gasketed, weather-resistant construction. Lamping up to 150W.

HOUSING

Rugged die-cast aluminum housing.

ELECTRICAL

  • For metal halide lamping, ballast is high power factor, constant wattage auto transformer
  • Electrical components are mounted to cast aluminum housing for optimum heat dissipation
  • For high-pressure sodium, ballast is normal power factor reactor type for 120V
  • High power factor, multi-tap, and most fixed voltages available

SHIELDING

Clear tempered glass is standard.

FINISH

Baked-on premium architectural bronze for maximum durability is standard.

CERTIFICATION

  • All units bear UL label
  • All units bear Made in U.S.A. label
  • UL listed for wet and damp locations

 

D-WPE

Cut Sheet

Mini Flood Light – MFL

The MFL Mini-Flood Light (shown with Yoke Mount) features a die-cast aluminum housing with integral hinging feature for ease of maintenance.

Ideal for buildings, parks, signage, sports field, parking areas or anywhere general floodlighting is desired. Tempered glass for maximum light distribution. An optional polycarbonate shield or wire guard, for vandalproof protection, is available. Anodized aluminum reflector designed in conjunction with diffuser for maximum efficiency.

Heavy-duty adjustable yoke for excellent aiming capabilities.

The MFL is fully-gasketed and of weather-resistant construction.

For wall or ceiling mounting. Designed for max of 400W metal halide or high-pressure sodium.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

  • For metal halide lamping, ballast is high power factor, constant wattage auto transformer
  • Electrical components are mounted to cast aluminum housing for optimum heat dissipation
  • For high pressure sodium, ballast is normal power factor reactor type for 120V
  • High power factor, multi-tap, and most fixed voltages available

SHIELDING

Tempered glass is standard.

FINISH

Exterior housing is finished in architectural bronze as standard, also available in custom colors.

CERTIFICATION

  • UL and CUL listed for wet locations

 

D-MFL

Cut Sheet

Decorative Cast Aluminum Luminaire – CVPL

The CVPL Decorative Luminaire is available for energy-efficient PL 1 and 2 lamp and low wattage HPS sources.

This unit is ideal for hotels, motels, walkways, entrances, garages, vanities, stairways, and anywhere low wattage, high illumination is desired. Gasketed for dust and moisture resistance. Optional photocell for dusk to dawn operation.

Ideal for wet locations.

HOUSING

One piece die-cast aluminum housing.

SHIELDING

Clear prismatic acrylic is standard. Optional white acrylic and clear prismatic polycarbonate.

ELECTRICAL

Energy saving and electronic class P, HPF ballasts comply with Federal Energy Efficiency standards.

FINISH

All exterior parts finished in architectural bronze stage polyester powder coat. Optional white finish. All reflecting surfaces are finished with baked white enamel.

CERTIFICATION

  • All units bear UL label
  • Listed for wet location
  • Made in U.S.A.

 

D-CVPL

Cut Sheet