Parking Garage Luminaire – CVALED48

The Surface Mount CVALED48 is designed specifically for parking garage applications and is available in 48W LED, operates on 120-277V technology, and offers an unprecedented lamp life.

This fixture is vandal-resistant and mounts on wall or ceiling. It is designed to provide long life and high reliability in environments where an extra level of protection and security is required. The housing can be mounted directly over a standard 4″ outlet box or surface wired through ½” conduit. Suitable for wet locations, these lights are typically mounted 8-14 feet high.

HOUSING

Durable die-cast aluminum with ½” threaded conduit entries for surface wiring. A continuous one-piece gasket ensures a weather tight seal

LENS

Clear Prismatic polycarbonate diffuser with UV inhibitors

FINISH

Dark bronze powder paint finish is standard*

FEATURES

  • Uses up to 88% less energy when compared to the HID equivalent
  • Instant on/off operation
  • Resistant to shock and vibration
  • Surge protection
  • Unique optical design 5700K color temperature
  • Produces no UV radiation
  • Contains no mercury

CERTIFICATION

  • Suitable for wet location
  • Made in U.S.A.
  • ARRA and BAA compliant
  • UL listed
  • 5 year warranty

D-8.41-CVALED-Garage

All-Aluminum Area Luminaire – S4000

The RLE S4000 is ideal for canopies, parking garages, walkways and recreational areas where high quality illumination is required. Designed for flush ceiling mount, pendant mount or wall mount with cast aluminum arm and canopy.

Suitable for indoor or outdoor applications. Gasketed door frame retains lens and provides for dust, moisture and insect resistance. Available with drop prismatic acrylic or polycarbonate lens. Optional flat tempered glass lens. Drop lens units accommodate up to 175W MH, 100HPS and 2PLC42CF S4000F Flat Glass units accommodate up to 100MH, 100HPS and 2- PLC42W CF

HOUSING

.090″ thick spun aluminum housing for durability and corrosion resistance.

ELECTRICAL

  • For metal halide lamping, ballast is high power factor, constant wattage auto transformer for optimum heat dissipation
  • For high pressure sodium, ballast is normal power factor reactor type for 120V
  • Compact fluorescent supplied with electronic univolt ballasts

SHIELDING

.125 thick multi-patterned injection molded clear prismatic drop acrylic and polycarbonate with ultraviolet inhibitors to minimize discoloration and add strength. Also available with flat prismatic tempered glass.

FINISH

Exterior housing is finished in textured architectural bronze. Optional textured black, white and silver painted finishes. All interior surfaces are finished in high gloss baked white enamel for maximum reflectivity and illumination.

CERTIFICATION

  • UL listed for wet location (Flush ceiling and wall mount) and damp location (pendant mount).

 

D-S4000

Cut Sheet

Cut-Off Cast Aluminum Exterior Wall Bracket – CWPA

The CWPA is made with a die cast aluminum housing and integral hinging feature for ease of maintenance.

Available in high-pressure sodium 70W-150W and metal halide from 70W-175W. 42W CFL also available.

Heat and impact-resistant tempered glass is standard. Textured anodized aluminum reflector delivers uniform light distribution. ½” threaded apertures are provided for surface conduit installation and/or optional factory installed photocells. Fully gasketed weather resistant construction.

Unit mounts directly over standard 4” outlet box or with surface conduit conditions.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

  • For metal halide lamping, ballast is high power factor, constant wattage auto transformer
  • Electrical components are mounted to cast aluminum housing for optimum heat dissipation
  • For high pressure sodium, ballast is normal power factor reactor type for 120V
  • High Power Factor, multi-tap, and most fixed voltages available

FINISH

Baked on premium architectural bronze for maximum durability is standard. Custom colors are available upon request.

CERTIFICATION

  • All units bear UL and Made in U.S.A. labels
  • Labeled for wet or damp locations

 

D-CWPA

Cut Sheet

Entrance/Walkway Light – CWPB

The CWPB is ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, and tunnels. Heavy-duty die-cast aluminum construction with powder coated finish. Heat and impact-resistant tempered glass lenses. One-piece designed anodized aluminum reflector for optimum light efficiency. Silicon rubber seal prevents leakage.

Available as downlight only or up and downlight. Lamping up to 150W MH, 150W HPS and compact fluorescent up to 42W available.

HOUSING

Heavy-duty die cast aluminum housing.

ELECTRICAL

  • Optimized for 150W PSMH and 150W HPS.
  • Standard with 120V, 277V, or multi-tap ballast
  • High Power Factor and other voltages/lamp options are also available

FINISH

Powder coated architectural bronze is standard. Custom colors are available upon request.

CERTIFICATION

  • All units bear UL label
  • Listed for wet location
  • Made in U.S.A.

 

CWPBLED-d3

Cut Sheet

Entrance/Walkway Light – CWPC

The CWPC is ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, and tunnels.

Heavy-duty die-cast aluminum construction with powder coated finish. Heat and impact resistant tempered glass lenses. One piece designed anodized aluminum reflector for optimum light efficiency. Silicon rubber seal prevents leakage. Available as downlight only or up and downlight. Lamping up to 150W PSMH,150W HPS and compact fluorescent up to 42W available.

HOUSING

Heavy-duty die cast aluminum housing.

ELECTRICAL

  • Optimized for 150W MH and 150W HPS
  • Standard with 120V, 277V, or multi-tap ballast
  • High Power Factor and other voltages/lamp options are also available

FINISH

Powder coated architectural bronze is standard. Customer colors are available upon request.

CERTIFICATION

  • All units bear UL label
  • Listed for wet location
  • Made in U.S.A.

 

D-CWPC

Cut Sheet

Entrance/Walkway Light – CWPD

The CWPD is ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, and tunnels. Heavy-duty die-cast aluminum construction with powder coated finish. Heat and impact resistant tempered glass lenses. One-piece designed anodized aluminum reflector for optimum light efficiency.

Silicon rubber seal prevents leakage. Standard wide throw reflector. Available as downlight only. Lamping up to 150W PSMH or 150W HPS and compact fluorescent 2-42W available.

HOUSING

Heavy-duty die cast aluminum housing.

ELECTRICAL

  • Optimized for 150W PSMH and 150W HPS
  • Standard with 120V, 277V, or multi-tap ballast
  • High Power Factor and other voltages/lamp options are also available

FINISH

Powder coated architectural bronze is standard. Other finishes are available upon request.

CERTIFICATION

  • All units bear UL label
  • Listed for wet location
  • Made in U.S.A.

 

D-CWPD

Cut Sheet

Mini-Wall Bracket – MWB

The MWB Mini-Wall Bracket Light’s high impact polycarbonate lens is designed for optimum light distribution. Optional wire guard is available upon request. Textured anodized aluminum reflector designed in conjunction with diffuser for maximum efficiency.

½” threaded apertures for surface conduit and/or optional photocell are provided for convenience during installation. All units are fully gasketed.

For wall mounting directly over standard 4” outlet box or with surface conduit. Optional tamperproof hardware is available.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

  • For metal halide lamping, ballast is high power factor, constant wattage auto aluminum housing for optimum heat dissipation.
  • For high pressure sodium, ballast is normal power factor reactor type for 120V.
  • High power factor, multi-tap, and most fixed voltages available.

SHIELDING

High impact polycarbonate lens standard. FINISH Baked on premium architectural bronze for maximum durability.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • UL Listed for wet location

 

D-MWB

Cut Sheet

Cut-Off Mini Area Wall Pack – TCWP

The TCWP Cut-Off Mini Area Wall Pack is made with a die cast rear aluminum housing and one-piece UV stabilized polycarbonate front cover.

Available in high pressure sodium 50W- 100W, metal halide 50W-100W and CFL 26W-42W. Dark sky friendly lighting aims light 15° below the horizontal.

The hydroformed aluminum reflector improves fixture performance. All units are provided with ½” threaded apertures allowing for surface conduit installation and/or optional photocell.

All units fully gasketed for weather-tight construction. All units may mount directly over standard 4” outlet boxes.

HOUSING

Rugged die cast aluminum rear housing.

ELECTRICAL

  • For metal halide lamping, ballast is high power factor, constant wattage auto transformer
  • Electrical components are mounted to cast aluminum housing for optimum heat dissipation
  • For high pressure sodium, ballast is normal power factor reactor type for 120V
  • High power factor, multi-tap, and most fixed voltages available
  • Compact fluorescent (CFL) supplied with universal voltage electronic ballast

SHIELDING

UV stabilized injection molded polycarbonate internally finished to match rear housing.

FINISH

Baked-on premium architectural bronze for maximum durability.

CERTIFICATION

  • All units bear UL labels
  • UL listed for wet and damp locations
  • Made in U.S.A.

 

D-TCWP

Cut Sheet

Cast Aluminum Wall Bracket – WPB

The RLE WPB is ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, and tunnels.

The WPB has a heavy-duty, die-cast aluminum back housing, with color-matched, UV-stabilized polycarbonate front housing and ribbed lens area. The front housing is hinged for easy relamping. One-piece designed anodized aluminum reflector for optimum light efficiency. Silicon rubber seal prevents leakage.

Lamping in compact fluorescent is 2- 18W, 2-26W, 2-32W and 2-42W and 35W, 50W and 70W HPS available.

HOUSING

Heavy-duty die-cast aluminum back housing.

ELECTRICAL

  • Compact fluorescent (CFL) standard with universal voltage electronic ballast
  • HPS standard with 120 volt normal power factor magnetic core and coil ballast

SHIELDING

Polycarbonate diffuser is standard.

FINISH

Powder coated architectural bronze is standard. Other finishes are available upon request.

CERTIFICATION

  • UL listed for wet locations

 

D-WPB

Cut Sheet

Exterior Wall Bracket – AWB

The AWB Exterior Wall Bracket Light is made of a die-cast aluminum housing and integral hinging feature for ease of maintenance.

The borosilicate prismatic glass is optically-designed for optimum light distribution. An optional polycarbonate shield for vandalproof protection over the glass refractor is available.

A textured, anodized aluminum reflector is designed in conjunction with the diffuser for maximum efficiency. Threaded apertures for surface conduit and optional photocell.

The AWB is a fully-gasketed unit for weather-resistant construction.

For wall mounting, install directly over standard 4” outlet box or with surface conduit conditions. Tamperproof hardware is an available option.

HOUSING

Rugged die cast aluminum housing.

ELECTRICAL

  • For metal halide lamping, ballast is high power factor, constant wattage auto transformer
  • Electrical components are mounted to cast aluminum housing for optimum heat dissipation
  • For high-pressure sodium, ballast is normal power factor reactor type for 120V
  • High power factor, multi-tap, and most fixed voltages available

SHIELDING

Borosilicate glass is standard.

FINISH

Baked on premium architectural bronze for maximum durability.

CERTIFICATION

  • All units bear UL label
  • All units bear Made in U.S.A. label
  • UL listed for wet locations

 

D-AWB

Cut Sheet