Vandalproof Security Luminaire – VANY

The VANY Vandal-Proof Security Luminaire is available in 18”, 24”, 36”, and 48” lengths, 1 and 2 lamps. 16 gauge design meets or exceeds most requirements for vandalproof lighting installation. Polycarbonate lens is standard.

Overlapping end caps are secured by 3 tamperproof spanner head screws. For individual wall or ceiling mount.

Can be made for continuous row mounting with optional joiner band. Mounting holes provided in housing for secure bolting to structure. Surface conduit collars optional.

HOUSING

Die-formed 16 gauge cold rolled steel. Ends are 16 gauge overlapping type.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

.125 thick polycarbonate with tongue and groove fit to housing. DR Hi-Impact acrylic is optional.

FINISH

All parts are painted with premium grade white enamel, with minimum 89% reflectance applied over iron phosphate pretreatment, for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant
  • Listed for damp location

 

D-VANY

Cut Sheet

Vandalproof Fluorescent – VA

RLE’s VA Vandalproof is available in incandescent up to 60W, fluorescent in Circline 20W and 22W and energy efficient PL lamps.

Available in 6”x8”, 8”x8”, 12”x12” and 6”x10” nominal sizes for a variety of lamp configurations.

The VA Fluorescent is ideal for correctional facilities, recreational areas, institutions, schools, and any area where vandalism is a concern.

Wall or ceiling mount for indoors or outdoors. Optional neoprene gasket for dust, moisture, and insect resistance.
Slotted screws are standard. Spanner head screws are optional.

HOUSING

Die formed housing in heavy gauge steel. Optional aluminum housing.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

.125” thick multi-patterned injection molded clear prismatic polycarbonate with ultraviolet inhibitors. Also available with smooth opal lens.

FINISH

All parts finish with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • UL listed for damp location
  • ARRA and BAA compliant
  • Optional wet location label for ceiling mount only

 

D-VA

Cut Sheet

Molded Vapor Tight Luminaire – SPVT

The RLE SPVT Molded Vapor Tight is available in 4’, and 8’ lengths, 1, 2 & 3 lamp T8, T5, and T5HO configurations. It’s weather resistant housing makes it ideal for parking garages, food processing areas, refrigerated storage, marinas, or any area where moisture protection is required.

Internal gear tray replaces traditional strip fixture insert, reducing both weight and expense.

Poured-in-place gasket and latches seal the enclosures from most hostile environments. Polycarbonate or stainless steel latches. Tamperproof latches also available.

For surface or pendant mounting. Optional stainless steel snap-in mounting brackets reduce installation time and eliminate mounting holes in fixture body. For individual or continuous row with optional watertight hubs.

HOUSING

Heavy-duty unsaturated polyester housing with foamed in place gasketing. Flame class V-0, 5VA.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

Ribbed diffuser is molded of UV stabilized acrylic/DR blend to resist breakage and maintain flexibility. Optional polycarbonate diffuser available.

CERTIFICATION

  • All units bear UL label
  • Wet Location label for National Sanitation Foundation (NSF) Approval available
  • IP65 rated. IP67 rated when used with 8 latch configuration

 

D-SPVT

Cut Sheet

All-Aluminum Area Luminaire – S4000

The RLE S4000 is ideal for canopies, parking garages, walkways and recreational areas where high quality illumination is required. Designed for flush ceiling mount, pendant mount or wall mount with cast aluminum arm and canopy.

Suitable for indoor or outdoor applications. Gasketed door frame retains lens and provides for dust, moisture and insect resistance. Available with drop prismatic acrylic or polycarbonate lens. Optional flat tempered glass lens. Drop lens units accommodate up to 175W MH, 100HPS and 2PLC42CF S4000F Flat Glass units accommodate up to 100MH, 100HPS and 2- PLC42W CF

HOUSING

.090″ thick spun aluminum housing for durability and corrosion resistance.

ELECTRICAL

  • For metal halide lamping, ballast is high power factor, constant wattage auto transformer for optimum heat dissipation
  • For high pressure sodium, ballast is normal power factor reactor type for 120V
  • Compact fluorescent supplied with electronic univolt ballasts

SHIELDING

.125 thick multi-patterned injection molded clear prismatic drop acrylic and polycarbonate with ultraviolet inhibitors to minimize discoloration and add strength. Also available with flat prismatic tempered glass.

FINISH

Exterior housing is finished in textured architectural bronze. Optional textured black, white and silver painted finishes. All interior surfaces are finished in high gloss baked white enamel for maximum reflectivity and illumination.

CERTIFICATION

  • UL listed for wet location (Flush ceiling and wall mount) and damp location (pendant mount).

 

D-S4000

Cut Sheet

Vandalproof Fluorescent – MVA

The RLE MVA is available in 2′ and 4′ lengths in 1 or 2 light versions in T8 ,TT5 Biax and T5 applications.

Ideal for Correctional Facilities, Recreation Areas, Schools and any area where vandalism is a concern. This versatile fixture can be surface, or wall mounted. Optional integral occupancy sensor is field adjustable for time and sensitivity. Optional corner mount box.

HOUSING

Heavy-gauge, die-formed cold rolled steel with 1/4″ holes and 7/8″ KO for secure mounting.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

.125 thick multi-patterned injection molded polycarbonate lens with ultraviolet inhibitors to minimize discoloration and add strength.

FINISH

All parts standard with high gloss baked white enamel finish with minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant
  • Optional Wet Location label with neoprene gasketing for ceiling mount only
  • Listed for damp location

 

D-MVA

Cut Sheet

Enclosed Disk Luminaire – DISK

RLE’s Enclosed Luminaire in contemporary style is designed for energy efficient PL lamps, circlines and 2D lamps White Acrylic Diffuser Two different sixes (12.75” and 16.75”) to accommodate a large variety of lamp combinations.

Designed for ceiling or wall surface mounting directly over a 4″ box.

HOUSING

Die formed steel housing.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

SHIELDINGS

Soft white acrylic diffuser is standard.

FINISH

Housing is finished inside and out with premium grade baked white enamel with a minimum reflectance of 89%. Custom finishes are available.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-DISK

Cut Sheet

Cast Aluminum Vandalproof Luminaire – CVA

The RLE CVA Vandal-Proof Luminaire is ideal for parking garages, correctional facilities, recreational areas, institutions, schools, and any area where vandalism is a concern.

Threaded 1/2” IPS tapped holes on side and back of unit for either wall or ceiling mount.

Suitable for indoor or outdoor applications. Neoprene gasketing for dust, moisture and insect resistance. Optional tamperproof hardware. Optional light shield to eliminate up light component for flush wall mount.

Available in 9” and 12” square. The 9” accommodates up to 100w HPS, 70MH and the 2PL9CF 12” accommodates up to 150PSMH, 150HPS and up to 42W CF.

HOUSING

Heavy die-cast aluminum housing for durability and corrosion resistance.

ELECTRICAL

  • For metal halide lamping, ballast is high power factor, constant wattage auto transformer for optimum heat dissipation
  • For high pressure sodium, ballast is normal power factor reactor type for 120V
  • Compact fluorescent ballast is electronic, universal voltage, 26 and 42

SHIELDING

.125 thick multi-patterned injection molded clear prismatic polycarbonate with ultraviolet inhibitors to minimize discoloration and add strength. Also available in opal prismatic.

FINISH

Exterior housing is finished in architectural bronze. Optional white finish. All interior surfaces are finished in high gloss baked white enamel for maximum reflectivity and illumination.

CERTIFICATION

  • All units bear UL and Made in U.S.A. label
  • UL listed for wet location (ceiling mount) and damp location (wall mount)

 

D-CVA

Cut Sheet

Vapor Tight Fluorescent High Bay – VFLHB

The VFLHB Vapor Tight Fluorescent High Bay is an extra wide unit available in 4 and 6 lamp T8, T5, and T5HO configurations.

The weather-resistant housing is ideal for parking garages, food processing areas, pool areas, refrigerated storage, marinas, or anywhere dirt or moisture protection is required.

Optional specular reflector is engineered to provide a highly-efficient, widespread distribution. Standard with white reflector. Standard with stainless steel latches. Optional tamperproof latches.

For pendant mounting. Stainless steel mounting brackets reduce installation time and eliminate the need for mounting holes in fixture body. Stainless steel V hooks simplify pendant mounting with chain or cable. For individual or continuous row with flexible conduit and optional watertight hubs.

HOUSING

Heavy-duty unsaturated fiberglass reinforced polyester housing with poured in place gasketing. Flame class 5VA.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

Glass clear diffuser is molded of UV stabilized impact resistant acrylic. Optional clear UV stabilized polycarbonate diffuser available for increased impact resistance and for both elevated temperatures and extreme cold temperatures.

CERTIFICATIONS

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and B AA compliant
  • IP67 Certified
  • National Sanitation Foundation (NSF) approved components
  • NEMA 4X rated
  • Factory hose -down tested at 1500 PSI, 1.4 gallons/minute @ 12 -24″
  • 5 Year LED Warranty

 

3.14---VFLHB-DIAG

Cut Sheet

Molded Vapor Tight Luminaire – VPVT

The VPVT Molded Vapor Tight Luminaire is available in 2’, 4’, and 8’ lengths, 1, 2 and 3 lamp T8, T5, T5HO and LED configurations. The weather-resistant housing is ideal for parking garages, food processing areas, refrigerated storage, marinas, or any area where moisture protection is required. Internal gear tray replaces traditional strip fixture insert, reducing both weight and expense.

Poured-in-place gasket and latches seal the enclosures from most hostile environments. Polycarbonate or stainless steel and tamperproof latches available. Optional stainless steel snap-in mounting brackets reduce installation time and eliminate mounting holes in fixture body. For individual or continuous rows with optional watertight hubs. Optional specular aluminum wide distribution reflector available.

HOUSING

Heavy-duty unsaturated fiberglass reinforced polyester housing with poured in place gasketing. Flame class V-0, 5VA.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

Ribbed diffuser is molded of UV stabilized acrylic/DR blend to resist breakage and maintain flexibility. Optional polycarbonate lens available in 2’ and 4’ only. Water clear lens is also available. Single lamp narrow unit is standard with a polycarbonate lens.

CERTIFICATION

  • All units bear UL wet location label
  • IP67 Certified
  • National Sanitation Foundation (NSF) approved components
  • Manufactured in the U.S.A.
  • ARRA and BAA compliant
  • Passed 1500 PSI high pressure hose-down test
  • Ballasts and fixture operate up to 70° C temperature

 

VPVTLED-d4

Cut Sheet

Molded Vapor Tight Luminaire – VPVTLED

As specified by Whole Foods Market

Available in 2’, 4’, and 8’ lengths, LED tube and board configurations. Weather resistant housing ideal for parking garages, food processing areas, refrigerated storage, marinas, or any area where moisture protection is required. Internal gear tray replaces traditional strip fixture insert, reducing both weight and expense. Poured-in-place gasket and latches seal the enclosures from most hostile environments.

Polycarbonate or stainless steel and tamperproof latches available.

Optional stainless steel snap in mounting brackets reduce installation time and eliminate mounting holes in fixture body.

For individual or continuous row with optional watertight hubs.

Optional specular aluminum wide distribution reflector available.

HOUSING

Heavy duty unsaturated fiber glass reinforced poly- ester housing with poured in place gasketing.

Frame class V-0, 5VA.

ELECTRICAL

  • LED: Highest quality driver, emitters and power supply for long life
  • Must be installed in accordance with NEC code for wet location installation

SHIELDING

Ribbed diffuser is molded of UV stabilized acrylic/DR blend to resist breakage and maintain flexibility. Optional polycarbonate lens available in 2’ and 4’ only. Water clear lens is also available.

CERTIFICATION

  • All units bear UL wet location label
  • LM79 available IP67 Certified
  • National Sanitation Foundation (NSF) approved components
  • Manufactured in the U.S.A.
  • ARRA and BAA compliant
  • Passed 1500 PSI high pressure hose down test

 

 

VPVTLED Cut Sheet

VPVTLED-d4