S66 Modular Luminaire S66

 

Available in 2’, 3’, 4’, 6’ and 8’ lengths, in 1 and 2 lamp configurations, T8 and T5.

6”x6” narrow design is architecturally-preferred for installation in corridors, lobbies, and office areas. Direct downlight is standard. Indirect and direct/indirect applications are available as options. Individual and continuous row for both surface and pendant mounting. Alignment brackets are available for continuous row installation. Ends seams are fitted to provide the appearance of continuous smooth channel. Knockouts on channel ends allow for through wiring or end feed.

HOUSING

Die-formed, welded heavy gauge cold-rolled steel. Uplight fixtures are provided with (2) rows of 1/2” apertures along top of the housing which provide approximately 12% uplight.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

Acrylic prismatic is standard. Optional white cross baffle, paracube, and parabolic semispecular cross baffle.

FINISH

All metal parts post painted with premium grade white enamel with a minimum 89% reflectance applied over iron phosphate pretreatment for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

D-S66

Cut Sheet

Surface Direct/Indirect Side Basket SDI

Provides indirect, soft, uniform illumination. Curved, perforated details with efficient indirect shielding. 

Perforated side baskets backed with reflective white acrylic, control glare and veiling reflections. Shielding is easily removed for relamping.

HOUSING

Die-formed, 20 gauge steel housing unitized into one piece.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless specified otherwise.

SHIELDING

Perforated diffuser element with matte white acrylic overlay.

FINISH

All metal parts are pretreated with a phosphate bonding process, and post-painted with an electrostatically applied high temperature baked matte white enamel, for superior quality and durability.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

D-SDI

Cut Sheet

Surface Direct/Indirect Center Basket SD/I-C

Provides indirect, soft, uniform illumination. Curved perforated details with efficient indirect shielding. 

Perforated center basket, backed with reflective white acrylic, control glare and veiling reflections, Shielding is easily removed for relamping. Available in array of custom colors.

HOUSING

Die-formed 20 gauge steel housing unitized into one piece.

ELECTRICAL

Energy-saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless otherwise specified.

SHIELDING

Perforated diffuser element with matte white acrylic overlay.

FINISH

All metal parts are pretreated with a phosphate bonding process and post-painted with an electrostatically-applied, high temperature, baked matte white enamel for superior quality and durability.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp locations
  • ARRA and BAA compliant

D-SDI-C

Cut Sheet

Recessed Center Basket – D/I-C

The RLE D/I-C Recessed Center Basket provides direct-indirect, soft, uniform illumination. Curved, perforated details combine recessed fixture advantages with efficient indirect shielding.

Perforated center basket, backed with reflective white acrylic, controls glare and veils reflections. Optional high-efficiency, frosted or opal acrylic diffuser available. Shielding is easily removed for relamping. Surface mount and flanged fixture available for drywall ceilings.

HOUSING

Die-formed, heavy gauge steel housing unitized into one piece.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty

SHIELDING

Perforated diffuser element with matte white acrylic overlay is standard.

FINISH

All metal parts are pretreated with a phosphate bonding process. All visible parts are postpainted with an electrostatically-applied, high temperature, high reflectance, baked matte white enamel for superior quality and durability.

CERTIFICATION

  • All units bear UL Label
  • Made in U.S.A.
  • Suitable for damp locations
  • ARRA and BAA compliant

 

D-D-I-C

Cut Sheet

Recessed Grid Indirect Side Basket – D/I

The D/I Recessed Grid Side Basket provides indirect, soft, uniform illumination. Curved perforated details combine recessed fixture advantages with efficient indirect shielding.

Perforated side baskets, backed with reflective white acrylic, control glare and veiling reflections, Shielding is easily removed for re-lamping. A flanged fixture is available for plaster ceilings.

HOUSING

Die-formed, 20 gauge steel housing unitized into one piece.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

Perforated diffuser elements with matte white acrylic overlays.

FINISH

All metal parts are pretreated with a phosphate bonding process and post-painted with an electrostatically-applied, high temperature, baked, matte white enamel for superior quality and durability.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-D-I

Cut Sheet

1×4 Recessed Center Basket – D/I-14C

The D/I-14C provides direct-indirect, soft, uniform illumination. Curved, perforated details combine recessed fixture advantages with efficient indirect shielding.

Perforated center basket, backed with reflective, white acrylic controls glare and veiling reflections. Optional high efficiency, frosted, acrylic diffuser available. Shielding is easily removed for relamping. Surface mount and flanged fixture available for drywall ceilings.

HOUSING

Die-formed, heavy gauge steel housing unitized into one piece.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

Perforated diffuser element with matte white acrylic overlay.

FINISH

All metal parts are pretreated with a phosphate bonding process. All visible parts are postpainted with an electrostatically-applied, high temperature, high reflectance, baked matte white enamel for superior quality and durability.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • ARRA and BAA compliant
  • Suitable for damp locations

 

D-D-I-14C

Cut Sheet

2×2 Modular Design Square – R24H

The Modular R24H is available in Pulse Start Metal Halide and High Pressure Sodium up to 400W.

A full compliment of shielding media for all lighting applications. Completely prewired and assembled with removable ballast assembly. Designed for mounting in 2×2 grid (T-Bar) ceilings. Flange for gypsum board ceilings is optional. Call for other ceiling installations.

Automatic resetting heat sensitive thermal protection device for non-IC installations protects fixture from overheating. Cold-rolled steel doorframe with captive countersunk ¼ turn spring-loaded fastener and concealed stainless steel hinging. Stainless steel doorframes are also available.

HOUSING

20 gauge CRS welded construction. Call for stainless steel housing.

ELECTRICAL

  • Metal Halide 100W and High Pressure Sodium 100W-150W.
  • High reactance autotransformer, High Power Factor, encased and potted, auto-resetting type.
  • Metal Halide 175W-400W and High pressure Sodium 250W and 400 CWA High Power Factor, encased, potted and auto-resetting type.

FINISH

Detergent cleaned with iron phosphate and chromic acid rust inhibitor, chip resistant, powder urethane polyester coating, electrostatically applied and baked.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A. label
  • UL listed wet location under covered ceiling
  • ARRA and BAA compliant

 

D-R24H

Cut Sheet

Premium Recessed T8 Troffer – PT8

This premium grade 2×2 or 2×4 fixture is available in 2, 3, 4, and 6 lamp configurations, in T8/T5.

Low profile design engineered for the T8 and T5 technology utilizing electronic ballasts. Flush steel doorframe hinges from either side and is secured by rotary cam-type latches. For mounting in exposed T-Bar (grid) ceilings. Optional flanged construction for various other ceiling types. Suitable for through wiring. Fixture housing flanges rolled to eliminate sharp edges.

Available with specular aluminum reflector (87% reflectance), high efficiency white reflector (92% reflectance), or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die-formed heavy gauge rust inhibited steel unitized into one piece with mitered corners.

ELECTRICAL

  • Energy saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless specified otherwise

SHIELDING

Acrylic prismatic is standard. Consult option sheet or call for other shielding.

FINISH

All metal parts are phosphate coated and painted electrostatically with baked white enamel, providing a durable finish with a minimum 89% reflectance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-PT8

Cut Sheet

Deep Cell Parabolic – PBL

The PBL Deep Cell Parabolic is available in 1×4, 2×2, and 2×4 lengths, 1, 2, 3, and 4 lamp configurations, T8, T5, and BIAX.

Nominal 3” deep cell parabolic louver provides optimum performance and efficiency, while ensuring a high level of visual comfort. Semispecular natural anodized aluminum louver is virtually maintenance-free. Black reveal louvers hinge from either side and are secured in either the open or the closed position by die formed steel hinges.

Mechanical light trap prevents light leaks. All air return functions are optional. Proper lamp positions allow fixture to operate at maximum efficiency with controlled widespread distribution.

Available with specular aluminum reflector (87% reflectance), high efficiency white reflector (92% reflectance), or high efficiency specular aluminum reflector (95% reflectance). Metric dimensional housing available.

HOUSING

Die-formed heavy gauge rust inhibited cold-rolled steel.

ELECTRICAL

  • Energy-saving electronic ballasts comply with Federal Energy Efficiency standards
  • Ballasts are <10% THD and include 5 year manufacturer’s warranty
  • Ballasts operate on 120V-277V (UNV) unless otherwise specified

LOUVER

Anodized aluminum louver, precision mitered. Standard finish is semi-specular. Optional specular silver and white finishes are available.

FINISH

All parts are pre-painted high-gloss, baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment, for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL label
  • Made in U.S.A.
  • Suitable for damp location
  • ARRA and BAA compliant

 

D-PBL

Cut Sheet

1.14 – High Efficiency Recessed Parabolic P2L

Available in 1×4, 2×2 and 2×4 sizes, in 1, 2, 3, and 4 lamp T5, T5HO, and T8 and BIAX in various cell configurations. 

Contemporary 2” deep anodized, aluminum parabolic contoured louver provides optimum performance and efficiency while ensuring a high level of visual comfort. For mounting in exposed T-Bar (grid ) ceiling. Optional flanged and surface-mount construction for other ceiling types. Available with specular aluminum reflector (87% reflectance), high efficiency white reflector (92% reflectance) or high efficiency specular aluminum reflector (95% reflectance).

HOUSING

Die formed 23 gauge steel unitized into one piece. Optional 20 gauge housing.

ELECTRICAL

Energy saving electronic ballasts comply with Federal Energy Efficiency standards. Ballasts are <10% THD and include 5 year manufacturer’s warranty. Ballasts operate on 120V-277V (UNV) unless otherwise specified.

SHIELDING

Anodized aluminum louver, precision mitered. Standard finish semi-specular silver. Optional baked white enamel finish available.

FINISH

All parts are finished with high gloss baked white enamel with minimum 89% reflectance applied over iron phosphate pretreatment, for maximum adhesion and rust resistance.

CERTIFICATION

  • All units bear UL and Made in U.S.A. labels
  • Suitable for damp locations
  • Meets BAA and ARRA manufacturing criteria

D-P2L

Cut Sheet